![]() ![]() It was built by the same guy.backwoodz prospecting. I cant find the exact pump I have but here is a smaller says its 200 gallon per minute 2 inch inlet with 1 and 1/2 inch discharge.mine was a 2 inch inlet with 2 inch discharge that was supposed to be 325 gallon per minute. I moved the sluice and pump and repositioned everything so the pump was upriver pumping downward to the nozzle and then the sluice sat further down river.still nothing.after a few hours of messing with it, it quit picking up water and pumping all together.am I using too much hose? or maybe a bad seal? and possibly bad plastic reducers? I'm not sure what brand pump but ive seen videos of the same one running a 4 inch dredge and he claimed it was only half throttle. I turned the pump off and reattached it but still couldn't get it to pump enough to vacuum. it had good blew water about 15 feet and almost shot out of my hand. The Proline 2 combo offers the versatility of being operated as either a 2 dredge or a small highbanker which can be fed continuously with a small shovel. it was slightly leaking a small amount of water in between the pump and the engine.the pressure hose ended up coming loose and popped off the nozzle. Good advice gentlemen, as I will be using it to run the highbanker, but want to be able to dredge with the highbanker also I think I will pay the dollars upfront for a centrifugal pump, 2 inch should be enough for my purposes. when I first cranked the pump on it was pumping but just a slow trickle was coming out of the sluice. it has a 2 inch cam lock and 2 reducers the first is 2 to 1.5 and then another one that's 1 to 1.25. I'm running a 3 horse predator engine with a pump that's supposed to be 325 gallons per minute. I have a jobe footvalve and made sure I primed the pump so there was no air in the foot valve. 20 ft of 2" suction hose and about 6 ft of 2 inch for the pickup hose. I'm using a jobe suction nozzle that has a 1.25 inch pressure hose and a 2 inch suction hose. Keene 1753H 3 Inch Highbanker Dredge Combo With Honda GX200 (Local Pickup Only) 3,895.00 Keene HBCK25 2.5 Inch Highbanker-Dredge With Honda 2.5HP Engine 2,799.00 Keene Highbanker Concentrator Combo With 2.5HP Honda And Miracle Mat 1,399.00 Keene Mini Max Highbanker Concentrator 899. The sluice has a jobe stand it sits on as well. it is a keene a 52 sluice with a jobe 2 inch highbanker / dredge hopper. I have a 2 inch dredge / high banker combo I put together. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |